Installation is surprisingly easy! Our fiberglass inground spas were designed specifically for installation, requiring only a short amount of time and a few basic materials. With your spa you’ll get all the specialized components needed, pre-assembled, for easy assembly. You’ll be amazed at how quick and easy it is:
Dig the hole 8–12″ wider than the footprint of the spa and a minimum of 41″ from the desired top of the spa. Be sure to add space for any finishes to the edges like coping.
Install the filter cloth and weeping tile around the outer edge of the hole. Add a minimum 6″ base of 3/4″ clear stone.
Lower in the spa and make sure it’s at the desired height and level. Tighten the hoses connected to the pump and connect the electricity.
Fill the tub about 1/3 full before beginning to backfill with 3/4″ clear stone. Fill the spa up to about 2–3″ below the top height of the spa.
Finish your surrounding surfaces as you like. A variety of elements works well – natural stone, rockeries and built up gardens, maybe even a privacy wall for an added secluded feel. Fill your pool, step in and enjoy…
By engaging the services of a contractor listed on the ImmerSpa website as a Contractor Partner, you acknowledge and agree to the following terms and conditions
traditional
INGROUND SPAS
MODERN
INGROUND SPAS
COCKTAIL
POOLS
Fill in the form below to get our Company Brochure. Learn more about our company, the benefits of choosing Immerspa, and view our Inground Spa and Pool options.
